TRS®-802V Type Single Phase Electrostatic Power Supply

UPS is talking! VAS-UPS (VAS-UPS) to the administrator!
Patent Registration No. 0247257

Selection of excellent products  by  Public Procurement Service (March  2000 to March 2003)

Overview

This product uses a microcomputer and a small LCD screen for   input power  1Ø/output power 1Ø. The LCD screen is  small, so  it has a single-phase, three-phase  uninterruptible power  supply TRS , GPS front panel functions  that  can be operated  with a keyboard, and a high-tech function that instructs the  normal UPS operation in the event of a fault. (A separate speaker can be installed remotely from the UPS installation location)

Features

  • 1-phase dedicated LCD UPS

  • On-Line Method

  • Voice information is detected through communication (VAS) (in case of power outage/release /inverter failure/ battery laser voltage/by-pass operation/UPS normal) – (DOWN from our website for details)

  • Undisconnected synchronous switching method

  • Digital Control Way

  • RS232/C Communication Functions and Remote Control

  • Pager function fitted (call function)

  • Constant voltage, constant frequency, sine wave output

Operation description

VOICE SYSTEMA
voice  (voice) device is a device that informs the user by voice of an alarm or status of an uninterruptible power supply (UPS) system. Voice devices use microprocessors to provide reliability, sound quality, and a variety of options to satisfy customers.The  existing product uses LED and LCD products, and an equipment operator must be on site to know the contents of UPS’s system, and the operation status cannot be known unless it is visually close.It is the voice device that improves this disadvantage.In other words, even if the UPS is used, the equipment may be down  during a power outage or instantaneous power outage, which occurs when the user does not know that the UPS is operating in By-Pass for some reason.The “voice
” device will inform users of  various driving messages to keep the UPS operating normally, ensuring that your equipment is safe in the event of an instantaneous power outage or power outage.

Voice System Contents
Alarm content and voice message content provided to the voice device.

Voice device type Voice content
When connecting communication between display and voice alarm board [repeat once] communication signal detected Thank you for using Taijin Tech products. It starts working now.
Detection of communication signal when the inverter is turned off by user operation [infinite repetition] It is in bypass state. In case of power outage, power is not supplied.
When the inverter fuse is OFF [infinite repetition] priority 1 communication signal detection UPS malfunction. Please contact Taijin Tech A/S Center. The phone number is 031-852-9111.
When operating UPS NORMAL [repeat once] communication signal detection The UPS is operating normally.
After connecting communication, the output voltage is
If it is within ±10% of the rated voltage [repeat once] communication signal detection		 Output power is supplied.
In case of output voltage LOW alarm
When the output voltage is 50% or less of the rated voltage [infinite repetition] communication signal detection		 Output power is blocked.
When overload occurs [infinite repetition] communication signal detection This is an overload condition. Please reduce your Use Place load.
When overtemperature occurs [infinite repetition] communication signal detection Overtemperature condition. Please maintain an appropriate temperature of 26 degrees.
In the state of KEPCO input
DC LOW and DC LOW SHUTDOWN
When an alarm occurs [infinite repetition] communication signal detection		 The rectifier and charging parts are in abnormal condition.
Detection of communication signal during power outage [infinite repetition] There was a power outage.
Be careful about power outage Use Place times in preparation for battery discharge.
Upon power recovery [repeat twice] communication signal detection It has been restored.
When operating the battery test button [repeat until test ends], contact signal is drawn. Testing the storage battery.
Keep the battery breaker in the OFF position.
When the battery test is completed normally [repeat twice], contact signal is drawn out. The storage battery is normal.
When an abnormal signal is detected during battery testing [repeat twice] contact signal output The storage battery is defective.
Charge the battery for at least 8 hours and then start testing again.
If an abnormality occurs in the battery during testing after charging,
You need to replace the storage battery.

standard size

Capacity
(KVA)		 Dimension Weight
(Kg)
Width Depth Hight
2 to 5 (external battery) 340 615 700 110
2~5(ES18Ah*16EA embedded) 420 700 780 200
7.5 ~10 450 800 950 190
15 ~20 550 900 1150 350
30~40 720 810 1425 500
50 800 900 1560 600

* In the  event of a power failure, the back-up and input three-phase voltage and 50 KVA or higher are produced by specification consultation.