TRS®-802S Type Single Phase Electrostatic Power Supply

Complete protection of your equipment against all kinds of power failures!

Screen Configuration

Overview

The TRS-802VType has the same operational overview configuration and is designed to fit single-phase small and medium capacity with smaller LCDs

Standard Specifications and Characteristics

Capacity(KVA) 2 3 5 7.5 10 15 20
General Specifications Cooling method forced air-cooled type
Qualification for use 100% Continuous Use
Control method Full Bridge full stop
element for use Bridge Diode Module
Inverter control method High frequency PWM control method 20㎑
ST/SW CUTTING SYSTEM Non-pure synchronization reduction by pure semiconductors
transformer insulation class H species
Input voltage a constant number 1st or 3rd prize
rated voltage Specified when purchasing 110V, 220V, 380V, 440V
Voltage fluctuation range ±10%
Rated frequency 50~60㎐ ±5%
power factor 0.80 LAG or higher
Output voltage a constant number 1 phase 2 winding type, one phase three-wire
rated voltage Designated when purchasing 110V, 220V, 110V/220V
Rated frequency 50~60㎐ ±0.5%
Voltage stability Within ±2%
Transient voltage fluctuation ±5%
Transient voltage response rate 50 %-100% sudden load when returning within ±2% within 50ms
Output voltage variable ±5% or more
waveform distortion THD within 3%
overload tolerance No more than 10 minutes at 125% / 1 minute at 150%
power factor 0.8 LAG
Noise 55dB or less 60dB or less
Comprehensive efficiency 83% or more 85% or more 88% or more
synchronous segmentation Synchronous collection time Within 4ms
an articulatory gun Inverter failure, overload, DC low voltage, manual switching
a storage battery Types Specify at purchase time
Power outage compensation time Specify at purchase time
Capacity Specify at purchase time
quantity 16 Cell
rated voltage 192V
the lowest voltage 168V
the maximum voltage 216V
Insulation characteristics Insulation voltage Apply for 1 minute with AC 1500V 60㎐
Insulation resistance 5V or higher when measured with DC 500V Megger
Temperature characteristics Transformer flow 125 DEG or less
Other 80 DEG or less
an enclosure paint color 5Y 7/1

Standard Specifications and Characteristics

Capacity
(KVA)		 Dimension Weight
(Kg)
Width Depth Hight
2~5(external battery) 340 615 700 110
2~5(ES18Ah*16EA embedded) 420 700 780 200
7.5 ~10 450 800 950 190
15 ~20 550 950 1150 350
30~40 720 810 1425 500
50 800 900 1560 600

*The above enclosure size may be changed without notice to improve product quality.